[OKDXA] 1/2 " & 1" NEW hardline available - cheap

[W5IF]

Hey Tom,
Good to hear from you again.  Well Ed, W5TM from Tulsa has purchased the
last 5 rolls I had.  He might be willing to sell one of them.  Don't know if
he had takers or use for all 5 rolls or not.  His email is w5tm at ecewb.com.
I have included a copy of this email to him.
Take care and I have a spare Drake case that I came up with, so sometime
your down this way, yell at me and I will give it to you.

73
Glen W5IF

-----Original Message-----
From: okdxa-bounces at mailman.qth.net [mailto:okdxa-bounces at mailman.qth.net]
On Behalf Of Tom Laszynski
Sent: Sunday, October 05, 2008 15:54 PM
To: Discussion of OKDXA
Subject: Re: [OKDXA] 1/2 " & 1" NEW hardline available - cheap

Hi Glen,

Do you by chance have any of the RG-331/U left?  If so, I could use some.

73,  Tom

At 06:41 PM 9/28/2008, you wrote:
>Fellow OKDXA Members;
>I am assisting the daughter of a fellow ham that 
>has become a Silent Key.  I have good luck in 
>selling most of the items that can be 
>shipped.  I have the following items that are 
>for local pickup only.  If you or your local 
>radio club is look for a deal on some ½ inch and 
>1.015 BRAND NEW, still crated in rolls, hardline 
>with PVC jacket, send them this way. These 
>spools fits easy in some trunks and certainly in 
>the bed of a pickup. I do not have any 
>connectors for this hardline. Here is what I have left.
>
>5 rolls of 300 feet - ½ RG-33!/u PVC jacketed 
>aluminum hardline made by Cablewave.  It is 
>marked with the RG-331/u number and you can see 
>from the specs bellows it is 50 ohm and low 
>loss.  Attenuation figures show this to have 1.9 
>dB of loss per 100 feet at 400 MHZ and at 100 
>MHZ it is .9 dB loss per 100 feet.  Price is 
>$150.00 per roll, take 1 or all at that 
>price.  That is .50 cents per foot !!!!!   You 
>can’t buy good RG8 for that price, but I don’t 
>want it sitting around going to waste.  This has 
>been kept inside, out of the weather, so act now
>
>For specs on the ½ hardline
>http://www.timesmicrowave.com/content/pdf/tl14/59.pdf
>
>I have 1 roll of the 1.015 hardline that is 
>still wrapped in plywood.  I believe, but am not 
>sure that there is also 300 feet on this 
>roll.  I can be sure as there is not a factory 
>tag on it like there was on the ½ showing the 
>footage.  None the less, there is a bunch and 
>while it has been outside in the weather, the 
>spool is in fairly good shape.  This spool is 
>big, I would guess 5 to 6 foot tall so bring a 
>pickup or a trailer. The price on the 1.015 is 
>$250.00 firm.  I do have brand new 
>connectors  for this hardline. These are 
>Cablewave 7/8 connectors #735101, Conn FXA78 - 
>50 NF for $15.00 each. These are NEW in their 
>package and have the rubber shrink wrap to go 
>over the connector. I also have 5 ea that appear 
>to be new but are not all still in their 
>package. These I will sell for $12.00 each.
>
>For specs on the 1.015  hardline
>http://www.timesmicrowave.com/content/pdf/tl14/60.pdf
>
>Attenuation figures can be found here:
>http://www.timesmicrowave.com/content/pdf/tl14/44.pdf
>
>Email me at w5if at valornet.com or call me at 
>405-527-0219 or cell of 405-919-6970.  All 
>subject to prior sale of course.  Replace that 
>coax before the snow and ice storms come.  73 Glen W5IF
>
>
>
>
>
>
>_______________________________________________
>OKDXA mailing list
>OKDXA at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/okdxa


_______________________________________________
OKDXA mailing list
OKDXA at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/okdxa