[nrv-hams] FW: Antenna building
Kenneth Walker
kjwalk at gmail.com
Sun Feb 24 19:06:02 EST 2013
Hello Donnie, Carter et. al.
1. Who are you and what is your call sign? Ken Walker KO4OM
2. Do you want the antenna for fixed, portable operation, or both? Fixed
3. What type of connector do you need on the coaxial cable that goes to
your 2M rig? PL-259
4. How long a cable do you plan between your rig and the antenna?150 feet?
5. If you are thinking about portable operation, do you have a method of
supporting the antenna? (PVC pipe, painter's pole, pool que, telescoping
mast, etc?) N/A
On Sun, Feb 24, 2013 at 4:58 PM, Carter Craigie <carter128 at verizon.net>wrote:
>
>
> -----Original Message-----
> From: D. S. Coleman [mailto:cwforever2 at gmail.com]
> Sent: February 24, 2013 12:52 PM
> To: Carter Craigie
> Subject: Antenna building
>
> Good day all,
> Unbeknownst to some of you, but knownst to most of you, we are planning a
> mass antenna building party this coming Saturday. We are building 2-meter
> Moxon antennas, a nifty compact antenna that has gain and very good
> directivity. I made mine for portable use in tracking Diane's APRS signal
> while she is on horseback, but it would be excellent for fox hunting and
> fixed station use as well. In preparation for that, I need some pertinent
> information from each and every one of you who intends to participate and
> build an antenna. I need to take inventory and make sure that we have
> everything covered to make the right number of antennas. Please answer the
> following
> questions:
>
> 1. Who are you and what is your call sign?
> 2. Do you want the antenna for fixed, portable operation, or both?
> 3. What type of connector do you need on the coaxial cable that goes to
> your 2M rig?
> 4. How long a cable do you plan between your rig and the antenna?
> 5. If you are thinking about portable operation, do you have a method of
> supporting the antenna? (PVC pipe, painter's pole, pool que, telescoping
> mast, etc?)
>
> My reason for asking is that there are many ways to build a Moxon and we
> want to build what is the best all round fit. Please reply directly to me
> (ab4i at arrl.net) and tell me what you hope for.
> 73,
> Donnie
> AB4I
>
> ______________________________________________________________
> nrv-hams mailing list
> Home: http://mailman.qth.net/mailman/listinfo/nrv-hams
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:nrv-hams at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the nrv-hams
mailing list