Just set it up with my 9700.  First time on WSPR, so I figured I'd try to get RX working before venturing into TX.  So far I've decoded N0JCF (loud!) and K0RAE on 2m.

I'm currently band hopping on 144 and 432,  Rx Only until I have a little better handle on this.  I think some onmidirectional antennas would be helpful - all I have up is beams for those two bands, currently pointed north from EN34iq, so I may not hear folks from east or west of me too well.

Will let it run today while I do other stuff.

When I do enable TX, what's a reasonable power level to choose?

73 de W0ZF

On Mon, Jun 9, 2025 at 10:55 AM Jon Platt via NLRS <nlrs@mailman.qth.net> wrote:
I just updated my laptop to Windows 11 and had to reinstall IC9700 drivers.  I think that I am up and running now on 2, 432 and 1296 WSPR hopping.    Have to check my power levels but I think all three bands are 10 watts.  Just got a 2m decode on K0RAE so it appears to be working !    I'll let it run through the day.

73, Jon
W0ZQ

On Monday, June 9, 2025 at 10:14:35 AM CDT, Chris Elmquist <chrise@pobox.com> wrote:


I see a relatively large signal on 2m, but they are pretty far below
the WSPR decode passband.

You need to be within 750 Hz of 144.489 MHz + 1500 Hz, so, centered at
144.490500 (or above 144.48975 and below 144.491250).

Chris NØJCF

On Monday (06/09/2025 at 10:00AM -0500), Chris Elmquist wrote:
> On Monday (06/09/2025 at 04:55PM +0200), Raymond Ehrlich wrote:
> > 
> > I fired up WSPR on 6m,2m, 70cm as well. I hope to hear you all!
>
> Cool!
>
> Are you uploading your spots to WSPRNet also?
>
> So far, only Aaron seems to be hearing me on 2m,
>
>  2025-06-09 14:32     N0JCF     144.490548     -2     0     EN35mb     10     W0ADL     EN35hc     33     278     W-2
>  2025-06-09 14:14     N0JCF     144.490548     -6     0     EN35mb     10     W0ADL     EN35hc     33     278     W-2
>  2025-06-09 13:58     N0JCF     144.490548     -5     0     EN35mb     10     W0ADL     EN35hc     33     278     W-2
>  2025-06-09 13:48     N0JCF     144.490608     -2     0     EN35mb     10     W0ADL     EN35hc     33     278     W-2
>
>
> > Sent: Monday, June 09, 2025 at 9:50 AM
> > From: "Chris Elmquist" <chrise@pobox.com>
> > To: "Aaron Lewis" <W0ADL@outlook.com>
> > Cc: "NLRS" <nlrs@mailman.qth.net>
> > Subject: Re: [NLRS] 200, 70, 23 cm WSPR running
> > Hey Aaron,
> >
> > I am hopping along with you on 2m, 70cm and 23cm now. Doesn't look like you
> > have heard me on 70cm or 23cm yet.
> >
> > I see someone on 70cm but they are too low in freq, outside the 1500 Hz
> > passband for WSPR to decode.
> >
> > Rig here is heavily modified FT-736R, phase locked to GPSDO so I think I
> > am pretty good on frequency and stability at this end.
> >
> > I did copy W7WXR from EN16nu (at -26) on 2mm 14:24 UTC
> >
> > Chris NØJCF
> >
> > On Monday (06/09/2025 at 02:36PM +0000), Aaron Lewis wrote:
> > > I have been hearing Chris NØJCF on 2m. I was inadvertently on 2m all night. I
> > didn't have the schedule quite set up right. changed to
> > [cid:9112cc8c-266f-439c-a565-0808fac89101]
> > > [cid:065a5659-c30c-402b-bbea-d24d7d2d413a]
> > >
> > > I could probably get 6m going soon as well. Separate radio, so I need a
> > separate instance of WSJT-X running on the same computer and I just remember
> > the command line for that stuff worked intermittenly for me in the past.
> > >
> > > FYI https://wsjt.sourceforge.io/wsjtx-doc/wsjtx-main-2.7.0.html#WSPR
> > >
> > > Aaron Lewis
> > > W0ADL ◊ EN35hc
> > >
> > > ________________________________
> > > From: nlrs-bounces@mailman.qth.net <nlrs-bounces@mailman.qth.net> on behalf
> > of Aaron Lewis <W0ADL@outlook.com>
> > > Sent: Sunday, June 8, 2025 23:23
> > > To: NLRS <nlrs@mailman.qth.net>
> > > Subject: [NLRS] 200, 70, 23 cm WSPR running
> > >
> > > My station will mostly be listening. I'll run the next 48 hours without
> > closing the WSJT-X software. I will manually tx occasionally as able. I'm still
> > thinking about how to run something long term.
> > >
> > > [cid:78803f0e-1e36-451f-b9dc-d47c8fbb385e]
> > >
> > > [cid:eeab942e-93ce-4bc6-b59a-20903863db7d]
> > >
> > > Aaron Lewis
> > > W0ADL ◊ EN35hc
> > >
> >
> >
> >
> >
> >
> >
> > > ______________________________________________________________
> > > NLRS mailing list
> > > Home: https://mailman.qth.net/mailman/listinfo/nlrs
> > > Help: https://mailman.qth.net/mmfaq.htm
> > > Post: mailto:NLRS@mailman.qth.net
> > >
> > > This list hosted by: https://www.qsl.net
> > > Please help support this email list: https://www.qsl.net/donate.html
> >
> >
> > --
> > Chris Elmquist
> >
> > ______________________________________________________________
> > NLRS mailing list
> > Home: https://mailman.qth.net/mailman/listinfo/nlrs
> > Help: https://mailman.qth.net/mmfaq.htm
> > Post: mailto:NLRS@mailman.qth.net
> >
> > This list hosted by: https://www.qsl.net
> > Please help support this email list: https://www.qsl.net/donate.html
>
> --
> Chris Elmquist
>
> ______________________________________________________________
> NLRS mailing list
> Home: https://mailman.qth.net/mailman/listinfo/nlrs
> Help: https://mailman.qth.net/mmfaq.htm
> Post: mailto:NLRS@mailman.qth.net
>
> This list hosted by: https://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html

--
Chris Elmquist

______________________________________________________________
NLRS mailing list
Home: https://mailman.qth.net/mailman/listinfo/nlrs
Help: https://mailman.qth.net/mmfaq.htm
Post: mailto:NLRS@mailman.qth.net

This list hosted by: https://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html
______________________________________________________________
NLRS mailing list
Home: https://mailman.qth.net/mailman/listinfo/nlrs
Help: https://mailman.qth.net/mmfaq.htm
Post: mailto:NLRS@mailman.qth.net

This list hosted by: https://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html