[NLRS] logging WSJT/N1MM

[Larry Peterson]

If you use N3FJP VHF software, it is extremely simple and seamless.

Larry 

> On Jun 15, 2020, at 11:56 AM, Rolf Krogstad <rolf.krogstad at gmail.com> wrote:
> 
> This weekend in the VHF contest I discovered what I consider a limitation
> about using WSJT-X with N1MM and haveing automatic logging of WSJT QSOs.
> 
> I was using one radio for 6 meters - hooked to WSJT and N1MM.  And a
> separate radio with no connection to the computer for 2M and 70cm.
> If I had WSJT open I could not manually log a contact, even for another
> band or mode.  I found that in order to manually log a non-WSJT contact I
> had to close WSJT.  Then I could manually set the frequency and mode in
> N1MM and then log the contact.
> 
> A bit clumsy.  It is possible I am missing something that would make it
> easier.
> 
> Rolf  NR0T
> ______________________________________________________________
> NLRS mailing list
> Home: http://mailman.qth.net/mailman/listinfo/nlrs
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:NLRS at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html