[NLRS] Gear for Sale (NG0R) --moving to FLA

[John Hoaglun]

All of the gear is spoken for as I accepted a bulk purchase offer.   Thanks for the inquires.

JH
---
John Hoaglun
NG0R - EN25ue
http://www.hoaglun.com



> On Jan 6, 2018, at 3:02 PM, John Hoaglun <john at hoaglun.com> wrote:
> 
> I have accepted a job in Florida so we are starting the process of clearing out our QTH in Minnesota before the house goes on the market likely in April.
> 
> Towers:
> 40 feet of  Rohn HDBX — straight, and tight (this was my VHF/UHF tower)
> 72 feet of Heights aluminum tower — very solid, contest grade tower (this was my HF tower)
> (I have both of the towers in a tilt over configuration with a falling derrick at my QTH )
> —The towers are down and disassembled
> 
> Antennas: 
> VHF/UHF:
>     Directive Systems 144MHz —K1FO 12 element
>     Directive Systems 222MHz - K1FO 10 element
>     Cushcraft 432 MHZ - ~16 ele (I need to count the elements to figure out which model it is)
>     M2 902 MHz antenna (I think that this is the 9 element model)
>     F9FT 1296 antenna  (I think that it is 35 elements)
>     Cushcraft 144Mhz yagi - 13B2
>     Cushcraft 144Mhz yagi - A148-3S
>     Cushcraft 222Mhz yagi - 225WB boomer
>     Directive Systems 432MHz - 11 element 
>     50MHz loop for roving
>     144MHz dual loops for roving
>     220MHz dual loops for roving
> 
> HF:
>     Force 12 C3S + 40m element (upgraded for 110mph winds)
>     40m 2 element yagi
> 
> Radio gear:
> Down East Microwave 1296 transverter + amp
> Down East Microwave 902 transverter + amp
> W0AMT IF switching system
> 144MHz tube amp + power supply 400w with 3w drive (will include an unfinished 50MHz amp + rack)
> Mirage B2516 144MHz amp 160w
> Mirage C1012 222Mhz amp 120w
> RF Concepts RFC4-110 432MHZ amp 110w
> Heathkit SB200 amp 80m-10m
> Ameritron RCS-4 Remote HF switch system
> 
> Rotors:
> Yaesu G800DXA (NEW in box, ordered Oct 2017)
> New control cable for the Yaesu rotor
> Yaesu G800SA rotor
> Hygain Ham 2 or 4 rotor
> Hygain Tailtwister rotor
> 
> Misc:
> 600feet of LMR400 or equivalent used for in-house cable runs in the ceilings
> Several ~120 foot sections of LMR400 used for the towers and in the conduit to the house
> LMR600 (~80 feet)
> Andrews flex
> Lots of aluminum parts for elements and booms hanging on the walls in the garage
> 
> Please contact me directly at john at hoaglun.com <mailto:john at hoaglun.com> or call my home: 320-275-9384
> 
> If someone wants to buy everything I am willing to make a bulk deal to make this go fast.
> 
> 73
> 
> ---
> John Hoaglun
> NG0R - EN25ue
> http://www.hoaglun.com <http://www.hoaglun.com/>
> 
> 
>