[NLRS] [VHF] LAST CALL for DAYTON....

[Bill via NLRS]

____________________________________
 From: _k5qe at hughes.net_ (mailto:k5qe at hughes.net)   


Here is  the current list of VHF/UHF gear that I have for sale. I can 
bring most of  this to Dayton, IF you let me know right away.  The car is 
already  packed, but I can squeeze in some things around the edges.  I am  
leaving for Dayton tomorrow, Monday, May 12th at Noon, so you must call  
me or email me right away if you want anything off this  list.

HELIAX CONNECTORS:

I have dozens of 1/2" Heliax and 7/8"  Heliax connectors and I need to 
reduce my stock somewhat.  Here is  what I have...

Type N Female for LDF4-50A.  This is the "standard"  1/2" Heliax with 
annular rings on the Cu Shield.  $5
Type N Male  for FSJ4-50B.  This is 1/2" SuperFlex Heliax with the spiral 
Cu  shield.  $5
Type N Male for LDF5-50A.  This is standard 7/8"  Heliax with annular 
ring shield.  $10
PL259 Male for  LDF5-50A.  This is standard 7/8" Heliax with annular ring  
shield.  $20(I only have a few of these, so they are special order  only)
Type N Female for LDF7-50A.  This is standard 1 5/8" Heliax with  annular 
ring shield.  $40  (I only have a few of these)
7/16  DIN Female for LDF7-50A.  This is standard 1 5/8" Heliax with 
annular  ring shield.  $40  (I only have a few of these)
Grounding kits  for LDF7.  These are complete with clamp, pigtail, and 
sealant.   $5

All the connectors are by dbProducts or RFS(Radio Frequency Systems)  and 
are new in the baggie complete with all gaskets, silicone grease,  
instructions, and a heat shrink boot for sealing the connection.  The  
mating surfaces are silver, pins are silver or gold.  Bodies are  brass 
or brass and stainless steel.  These connectors are very easy  to 
install.  They are actually easier than the Andrew  connectors.  I want 
to emphasize that these connectors fit the Andrew  Heliax perfectly.  I 
have never had a complaint or return on any of  these items.

222MHz

1)TE Systems 2252G--High power amp for  222.  10-20W IN, 225W OUT.  $525.

2)TE Systems  2210G--Standard amp for 222.  4-10W IN, 130W OUT. $345.

3)Demi  222-28 Transverter.  Max 5W input on 28MHz gives 25W out on 222.   
Perfect for fixed or rover use.

432MHz

1)TE Systems  4450G--High power amp for 432.  10W IN, 180W OUT. $580.

2)TE  Systems 4412G--Standard amp for 432.  15-20W IN, 100W OUT.  $350.

3)DEMI 432-28HP high power transverter for 432.  SN =  434.

902/3MHz

1)Directive Systems 3311LYRM.  Rear mount  11el loop yagi.  3ft boom.  $60

2)Directive Systems  3318LYRM.  Rear mount 18el loop yagi.  6ft boom.   $70

3)M2 18el EZ style 902 yagi.  Rear mount. 70" boom.  $90

7)Preamps:
A)WD5AGO preamp for 902.3.   0.4db NF with 30db gain.  Type N--$75
B)WA2ODO  preamp for 902/3.  0.32db NF with 22db gain.  Type N--$65
C)DEMI 915LNA SN=6179.  High IP3, 33cm LNA Weatherproof,  <0.7dBNF, 
>16dBG, DC Feed-thru, Type N input, SMA out.   $72

10)I have TWO of the Motorola "600W" cell amps for 902/3 that are  NEW in 
the box.  These will need to be converted, but the conversion  is easy 
and only takes about 2 hours.  These require about 100-150mw  of drive 
and run off 26-28VDC.  They will make 400W output plus or  minus 50W 
depending on how well they are converted. $250 each or $450 for  the lot.

11)I have two of the Motorola "600W" cell amps that are "fixer  uppers".  
One was in use in the shack for 6 years @400W, but it  suddenly quit 
making power.  The other one was converted, but never  put on line.  It 
does not make power either.  No obvious damage  to either of these 
units(i.e. no burned out traces or components).   These require only 
100-150mw of drive when working properly.  You can  save a bunch 
here(normal price is $300+) if you can figure out what is  wrong.  These 
require 26-28VDC.  $75  each.

1296MHz
1)Directive Systems 2314LYRM.  13el loop yagi for  1296, rear mounted.  
3ft boom, perfect for a rover.  $50

2)Directive Systems 2324LYRM.  24el loop yagi for 1296,  missing boom to 
mast plate.  We can find one or make one.  6ft  boom. $60

3)M2 1296-22EZ antenna.  22el rear mount yagi.  68"  boom.  $110


2304MHz

1)Directive Systems loop yagi for  2304 Model 1221LYRM.  Rear mount 21el 
loop yagi for 2304.  $60

2)Directive Systems 27el loop yagi for 2304.  Rear mounted, 4  foot 
boom.  $65.


Thanks es 73 Marshall K5QE
Phone is  409-787-3830 if you want to "cuss and discuss" any of  this.....