[NLRS] RCA DH24SP Signal Splitter

[Dr. Gerald N. Johnson]

Looks to me as if its a die casting including the connector threads, 
with some sort of plate in the back. I'd say it works fine out doors but 
if I was worried, I'd cover the back seams with non corroding RTV or 
black Permatex gasket seal, or Seal-All. Then I'd work hard at sealing 
the connectors and the cable ends, else the coaxes will get water in the 
F connectors.

Don't expect it to survive significant transmitter power, the cores are 
probably microscopic in size to get to the high end.

73, Jerry, K0CQ

On 8/17/2013 4:31 PM, Curt Peterson wrote:
>
>
> Hi All - I've tried&  tried to get answers 'on -line' but could not.  SO...............here's the question; Can the above signal splitter be used out doors where it will get wet ? ? Thanks much. I know the answer is probably simple but please help.
> 73's  Curt KC0FQZ
> ______________________________________________________________
> NLRS mailing list
> Home: http://mailman.qth.net/mailman/listinfo/nlrs
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:NLRS at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>