[NLRS] Power Head Question

[Jeff Pahl / K0JSP]

Do you have any pictures?  I think that's an HP8481 series head, but
I'm not sure.  The cable description doesn't sound quite right.  Is
the cable detachable?

73, Jeff



On Mon, Oct 13, 2008 at 4:46 PM, Jim Froemke <jim.k0mhc at earthlink.net> wrote:
>
>
>
> In preparation for MUD I need some help on what power meter unit will work with the power head that I acquired.
>
>
>
> The power head is labeled: "Local Power Sensor", has a number on it: 5895-01-326-0664, has a P/N of: A3080491-2, has a 12 pin (4 thick pins in the center and 8 thinner pins around the outside) military (?) type connector with a relatively long cable. The calibration chart on the side of the power sensor 0.5 to 9 GHz (flat response).
>
>
>
> Any help in finding out what brand and model of power unit that will work with this power sensor would greatly be appreciated!!!
>
>
>
> See you at MUD (Friday only).
>
> 73, Jim
>
> K0MHC
>
>
>
> _______________________________________________
> NLRS mailing list
> NLRS at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/nlrs
>
>