[NLRS] Mirage Amplifier

[jarvis at jarviscomputer.com]

Hi Scott,

I have a B2516G.   This unit is extremely sensitive to input impedance.  
If there is any mismatch on the input side then there is little or no
output drive.

73 Clare
de K0NY




>
> Anyone in NLRS land have a Mirage B215 or similar?  I think there was also
> a 1015?  This is the 2w input 150w output model.  I need to find a
> schematic or someone that knows what commonly goes wrong on these.  This
> one has no output with 2-5w of drive, the manual states a max of 5w drive.
>
> Can I remove the first stage of the amp to increase the input level, and
> if so how much could I then drive the amp with?  I'm assuming that the
> finals are kaput on this one.  I haven't taken it apart to further
> diagnose yet, all I know so far is it powers on and the preamp works, but
> it doesn't have any output.
>
> 73,
>
> Scott  KB0NLY
>
> _______________________________________________
> NLRS mailing list
> NLRS at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/nlrs
>