[NLRS] Looking For: Vcc treaded feedthru

[Donn Baker]

Hi Jon,

The dimensions aren't familiar but its very close to a #10 thread (0.190 vs
0.193).  Its most likely a metric thread )on DB6NT equipment, right ?), and
you'll have a tough time matching it around here.

I do have a couple of #8-32 feed thrus if you need one.  Let me know.

73 Donn
WA2VOI/0


At 12:36 16-01-05 EST, W0ZQ at aol.com wrote:
>Win a new Icom IC-756PROIII and help QSL/QTH.net
>Details at: http://mailman.qth.net/index.html
>
>
>I busted the wire coming out of the 13.8vdc feed  through on my 10gigs
amp.   
>Don't ask how.   
>
>Does  anyone have one ?   
>
>My 3/16" nut driver fits it, the barrel of  the feedthru measures 0.150",
the 
>threads measure 0.192" (OD) with about four or  five complete turns on the 
>treads while the entire main body measures about  0.415" end to end not 
>including the wires that stick out both ends.    The part number says "T
053".
>
>I'm sure the part is non-critical but it  would be nice to get one that has 
>the same size and thread  taper.    
>
>73, Jon
>W0ZQ  
>
>_______________________________________________
>NLRS mailing list
>NLRS at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/nlrs
>
>