[NLRS] 10 Ghz test this Sat.

[Robert E. Wesslund]

Hi All,

I will be there Saturday with equipment  to measure 10 and 24 GHz antennas.
I am working on a weak signal source  and hope to have it operational.  The
difficulty has been to get the leakage  so only the attenuated signal is the
one that radiated.

It might also be a chance to run some test on two frequency desensing.  Last
Friday some tests were run and it indicated that 2 MHxz is required between
two stations operating at the same site.  More testing would be helpful



73 Bob WØAUS

-----Original Message-----
From: nlrs-bounces at mailman.qth.net
[mailto:nlrs-bounces at mailman.qth.net]On Behalf Of Mike
Sent: Wednesday, July 14, 2004 9:37 AM
To: nlrs
Subject: [NLRS] 10 Ghz test this Sat.


Hi all, I was wondering if it is possible or practical to set up a weak
signal source that we could all aim our dished at and then the source
could be turned down gradually in strenght and we could note where our
receive capability was lost.  This would give a relative indication of
how sensitive the various receiver/transverter/dish combnitions are
wouldn't it?

Maybe I'm sort of asking if Bob could do this?

Any thoughts?

Mike
KB0ozn
_______________________________________________
NLRS mailing list
NLRS at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/nlrs