[NJARC] Philco 60 Antenna Coil - Open

[Matt Reynolds]

Joe,


Have you tried reflowing the solder on the joints where the coil go into the wires?  I had a flaky IF coil on the Philco 38-4 I was working on with RadioWild.  We were able to get it to work by reflowing the connections to the coil because they were small wires that had corroded away.


Might not be the same situation but thought I'd mention it.


Matt

________________________________
From: NJARC <njarc-bounces at mailman.qth.net> on behalf of TrainBee via NJARC <njarc at mailman.qth.net>
Sent: Wednesday, March 22, 2017 5:27:56 PM
To: njarc at mailman.qth.net
Subject: [NJARC] Philco 60 Antenna Coil - Open

Just remember
Reply = Poster
Reply All = Everyone

_________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/mailman/private/njarc/attachments/20170322/af3f7821/attachment-0001.html>