[NJARC] Silvertone Dial String

[Thomas Lee]

Had this stringing problem with a similar Silvertone years ago.  Here is the solution.


[Post]<http://antiqueradios.com/forums/viewtopic.php?p=1660251#p1660251>

Just a simple loop. What threw me was that I was looking for what I thought was a more complicated dial string set up. In the photo you will see that there is a HOLE that the string runs through going from the drum pulley to the band selector pulley. That hole exists on both sides of the radio chassis I thought it was just the way the radio supports were made. The other side (Right) has no string going through it. I was able to find a Silvertone on youtube that with the automatic dialing.  I froze the vid and was able to barely make out the string pattern and it going through the hole. I enhanced the pic, edited and blew it up.   Btw I used a  rubber band from a vcr instead of string.  Worked great, no slack to contend with.



Attachments: [SilvertoneBW.jpg]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/mailman/private/njarc/attachments/20170118/1a70d9dc/attachment.html>