[NJARC] Selenium Rectifier replacement

[Aaron Hunter]

Joe, I didn't read through this as it is now late in the evening for me, 
but this article might help:

http://w3hwj.com/index_files/RBSelenium2.pdf

Aaron Hunter

TrainBee via NJARC wrote:
> Just remember
> Reply = Poster
> Reply All = Everyone
>
> _________________________________________________________
>   
>
> ------------------------------------------------------------------------
>
> Recently, I've come across a few 50's vintage radios that should have 
> their selenium rectifiers replaced.  I'm thinking safety first over 
> authenticity.  This is uncharted territory for me.  What are some of 
> the guidelines to follow for their replacement.  I have some 1N4007 
> diodes, but I'm not sure of the math to follow.  When it comes to the 
> corresponding resistor, is it best to use a 10 w resistor after you 
> figure out the necessary resistance.
>
> I don't recall seeing an article in our newsletter over the last 15 
> years or so.
>
> Thanks in advance for your help.
>
> Joe Devonshire
> ------------------------------------------------------------------------
>
> ______________________________________________________________
> NJARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/njarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:NJARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/mailman/private/njarc/attachments/20160413/9bd8858c/attachment.html>