[NJARC] What paint for Philco chassis?

[sgt88 at atlanticbb.net]

In one of the 35 You Tube videos on the Philco repair I had previously 
mentioned...he shows using Rustoleum Applicance Epoxy matte metal color...I 
forget if he mentioned the exact color...and by his reaction...seemed to be 
pleased with the results.

I just got a reply from Rustoleum inquiring about a "nickel" Appliance Epoxy 
that the mentioned in the video...they do not make a nickel...only 
"stainless"...

I'd think that one would want a matte rather than any level of "gloss"...

On Wed, 23 Jan 2013 14:15:37 -0500
  "Martin Friedman" <radiomf at comcast.net> wrote:
>  On my model 70 I used "cold galvanizing compound"  a zinc based spray paint.
>  It is available at the Home Depot. It is not glossy and probably looks
>  similar to the color of the galvanized chassis when new.
>  Marty F
>
>  -----Original Message-----
> From: njarc-bounces at mailman.qth.net[mailto:njarc-bounces at mailman.qth.net]
>  On Behalf Of sgt88 at atlanticbb.net
>  Sent: Wednesday, January 23, 2013 1:44 PM
>  To: njarc at mailman.qth.net
>  Subject: [NJARC] What paint for Philco chassis?
>
>  Just remember
>  Reply = Poster
>  Reply All = Everyone
>
>  _________________________________________________________
>  I'd like to spray paint the chassis...your suggestions most welcome, Steve
>  T.
>  ______________________________________________________________
>  NJARC mailing list
>  Home: http://mailman.qth.net/mailman/listinfo/njarc
>  Help: http://mailman.qth.net/mmfaq.htm
>  Post: mailto:NJARC at mailman.qth.net
>
>  This list hosted by: http://www.qsl.net
>  Please help support this email list: http://www.qsl.net/donate.html
>