[NJARC] Predicta Danish Modern Help!

[John Tyminski]

 Some one hear should have the service notes for this set.
Before trying this set you should replace most of the caps in it. They
are those nasty Black Beauties if they over heat and pop as some do
they can do damage to the PC board. the PC boards are very fragile.
The terminals on the PC board are fragile and easy to snap off. That's
a very rare TV use caution when you restore it. If If remember rite
That set has is a 5.6 ohm fusible resistor in it if this gos bad
replacement's are hard to find.

John T

On Sun, Aug 23,____________________________
>
> Hi Guys, I just got a Danish Modern Predicta which is equipped with the type 10L43A chassis - seems identical to the 17" princess chassis (it has a power transformer).  Anyway, the lead from the picture tube plug which goes to the 400 volt boost was undone when I got it and I can't seem to figure out just where that terminal is.  Can someone please tell me where the 400V pin terminal is located?????
> Thanks,-George-
> You meet the nicest people ... in a STUDEBAKER!
>
>
>
>
> _________________________________________________________________
> Windows Live: Make it easier for your friends to see what you’re up to on Facebook.
> http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_facebook:082009
> ______________________________________________________________
> NJARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/njarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:NJARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>