[NJARC] need help with for gloritone cathedral

[Aaron Hunter]

John

I checked the Rider and Gernsback schematics for values and none are 
given for the speaker. 

I next checked resistances of a couple of speakers I have, an AK and GE. 

The field coil or electromagnet measures about 1,000 ohms. 

The input winding to the output transformer measured about 500 ohms on 
the GE, none was with the AK.

The voice coil on the AK measured at 2 ohms and about the same on the GE 
with the output transformer connected.  To properly check if a voice 
coil or output winding is open, you would have to disconnect one of the 
leads to open the loop.

I also checked values on a Philco speaker I have and found values 
ranging from 30 to 80 k (80,000) ohms and flucuating.  This means the 
windings are open.

On finding another speaker, my guess is you would have to search the web 
to see if anyone lists one for sale and watch eBay. 

Aaron

philcoguy at verizon.net wrote:

>Visit our web site - See http://www.njarc.org
>_______________________________________________
>yesterday I bout a gloritone model 27 cathedral radio it looked like it had a speaker that was ripped I fired it up the  dam thing played with no hum it sounded very tiny so I pulled out the speaker and some dummy tide in a smaller one guys I need your help do you know the value or how read or find the vale and where can I get one please and thank
>
>John Tyminski JR
>_______________________________________________
>NJARC mailing list
>NJARC at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/njarc
>
>
>  
>