[NJARC] 1920's rig

[n3ibx]

Dave,
        If Marty would like to use the 11.9KV transformer for a battery 
charger I could give 'em a pair of 1/2 wave diodes to use with it. They're 
rated at 17,500 amps and weigh about 700 lbs each and stand 6' tall. Of 
course, if the batteries he is using are nickel metal hydride , etc, he 
would have to come up with a pulsing circut on his own.
Joe N3IBX





----- Original Message ----- 
From: "David R Sica" <davesica at juno.com>
To: <njarc at mailman.qth.net>
Sent: Friday, February 10, 2006 12:18 PM
Subject: Re: [NJARC] 1920's rig


> Visit our web site - See http://www.njarc.org
> _______________________________________________
> Marty,
> That transformer should work fine as part of a charging circuit for that
> mega-battery you once bought in!
> --Dave
>
> On Fri, 10 Feb 2006 12:15:01 EST Radiomf at aol.com writes:
>> Visit our web site - See http://www.njarc.org
>> _______________________________________________
>> Hi Joe,
>> maybe you can bring that transformer for show and tell. Then, at the
>> next
>> show and tell you can show your scar and tell about your hernia
>> operation.
>> Marty
>> _______________________________________________
>> NJARC mailing list
>> NJARC at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/njarc
>>
>>
> _______________________________________________
> NJARC mailing list
> NJARC at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/njarc