[NJARC] Electrolytic Cap replacement question

[Goulart, Stephen F (Steve), ALABS]

Joe,
Electrolytic specs were -50 to +100% on most caps so exact values generally aren't that critcal. Voltage spec is since in theory if you are much under the working voltage for the cap it will de-form.
Steve

-----Original Message-----
From: njarc-bounces at mailman.qth.net
[mailto:njarc-bounces at mailman.qth.net]On Behalf Of TrainBee at aol.com
Sent: Thursday, March 03, 2005 4:16 PM
To: njarc at mailman.qth.net
Subject: [NJARC] Electrolytic Cap replacement question


Next meeting 3/11/05
NJARC Spring Meet Hazlet, NJ 3/13/05 - See http://www.njarc.org
_______________________________________________
I'm looking for a suggestion for what to use as a replacement for a 60µf at 150v 
(x3) electrolytic capacitor?  The closest I can find is a 47µf or 100µf.  The 
3 section unit in the radio measures 2 1/8 x 1 1/8 inches if that helps.  
There isn't any room to use a larger replacement.  

Any ideas anybody?

Thanks.
Joe Devonshire
_______________________________________________
NJARC mailing list
NJARC at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/njarc