[NJARC] Heathkit DX 60

[n3ibx]

Larry - What type of mic connector is on it? (sometimes people change them). 
I may have one for you. BTW, a crystal head, non-amplified D-Ten-Four mike 
would be an excellent choice with your DX-60. If it has a pre-amp in it, 
just keep it at a low level.
Best Regards,
                     Joe Cro N3IBX
----- Original Message ----- 
From: "Larry - WA2DGD" <wa2dgd at comcast.net>
To: "New Jersey Antique Radio Club" <njarc at mailman.qth.net>
Sent: Sunday, April 24, 2005 2:03 PM
Subject: Re: [NJARC] Heathkit DX 60


> Visit our web site - See http://www.njarc.org
> _______________________________________________
> Hi Joe,
>
> Thanks for the info. I'll probably use it mainly on cw. I think some of 
> the electrolytics have already been replaced. I'll play around with AM 
> using an old D104.
>
> Thanks,
> Larry
>
> n3ibx wrote:
>> Visit our web site - See http://www.njarc.org
>> _______________________________________________
>> Larry,
>>         From the power outputs you've described, it appears as if 
>> everything is working FBOM. Don't expect as much power on the higher 
>> bands as the lower ones.  Do you plan on using it on CW , 'Fone, or both? 
>> I hear plenty of DX-60's on AM and they seem to make a pretty good 
>> account of themselves. I'd recap the power supply, replace all of the old 
>> electrolytics, etc, to give it some integrity. Power output on 'Fone 
>> should be in the neighborhood of 20W or so. It uses carrier controlled 
>> AM. Any hi-Z mike should work fine with it.
>>
>> The best of luck and a lot of fun with it.
>> Regards,
>>            Joe Cro N3IBX
> _______________________________________________
> NJARC mailing list
> NJARC at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/njarc