[NJARC] Broadcast band tracking on Emerson model CY288

[M Nelson]

Not to bu in. I am a member but somehow I am getting this correspondence
from you guys. Though it is interesting see if you can remove my email from
the "cc"
Thanks

Mike Nelson
----- Original Message -----
From: "Aaron Hunter" <ahunter01 at comcast.net>
To: "New Jersey Antique Radio Club" <njarc at mailman.qth.net>; "Philip
Vourtsis" <pvourtsis at att.com>
Sent: Friday, September 24, 2004 8:29 PM
Subject: Re: [NJARC] Broadcast band tracking on Emerson model CY288


> Phil
>
> C1 should be the RF part of the ganged tuner and C6 (not 4) the trimmer
> for same.  Al or I could provide a better copy.
>
> Aaron
>
> Vourtsis, Philip (Phil), ALABS wrote:
> > Al,
> >   Aaron was able to point me to a decent copy
> > of the schematic. It shows C4 connecting to one
> > of the grids on the 6A8GT tube. C1 is also in
> > parallel with C4 and is adjustable. What is that
> > all about (2 caps in parallel both adjustable).
> >
> > Phil Vourtsis
> > Pres.- New Jersey Antique Radio Club
> >
> >
>
>
> _______________________________________________
> NJARC mailing list
> NJARC at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/njarc