[NJARC] Another power transformer problem.

[Ray Chase]

In checking the power for the tube filaments plus assuming a plate 
voltage of 300 @ 100 ma. and throw in a couple of dial lights and a few 
losses then the 57 watts is just about right.  I have quite a few spare 
transformers so if you figure out the voltages required I might be able 
to supply one.  Not a direct fit but you might be able to shoehorn it in.
Ray Chase

Al Klase wrote:

> Hi Don,
> 
> If you have a model number I'll take a look for a schematic, and see 
> if I can puzzle it out.
> 
> Al
> 
> Donmervin@aol.com wrote:
> 
>> I've got a Rogers-Majestic tombstone with a bum transformer. ( Very 
>> hot and only 9V. on the secondary) I've got schematic and parts data 
>> but don't know what the Voltage should be the center tapped secondary 
>> or what the transformer power rating should be. The tube line up is; 
>> 1- 80, 1-6A8, 2-6K7, 1-6F6, 1-6B6. The plate on the chassis rate the 
>> power as 57 watts. (490 mA?? That seems kind of heavy.)   Can one of 
>> you help me?
>> 
>> Don Baldwin
>> Medford NJ
>> 
>> 
>> 
>> 
>> 
>> --- StripMime Report -- processed MIME parts ---
>> multipart/alternative
>>   text/plain (text body -- kept)
>>   text/html
>> The reason this message is shown is because the post was in HTML
>> or had an attachment. Attachments are not allowed.
>> Please post in Plain-Text only.---
>> _______________________________________________
>> NJARC mailing list
>> NJARC@mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/njarc
>> 
>> 
> 
>