[NJARC] Zenith parts

[njarc@mailman.qth.net]

Thanks everyone for your help and information.  The Zenith that I am working 
on is a 10S669 and it has 10B1 on the case.  It is a console with a 
rectangular convex bezel.  The flywheel is only checking at this point.  
Thanks for the sealing ideas you've all offered.  
The chassis is in excellent condition.  The rubber wire insulation is in 
deplorable condition and other than the woven insulation, it will all have to 
be replaced along with the caps.  
The case is a whole story in itself.  Parts of the plywood case have begun to 
come apart.  I've had success in the past with injecting wood glue and 
clamping the sections together.
The photo veneer on the front curved sides is in pretty good condition with 
just a few scratches.  Here is the character part of the piece.
The prize of this is the complete Wave Magnet w/box cover.  
Before I start on the restoration, I'll take pictures.  Once finished, I'll 
lug in into one of our show and tell sessions.  If it's in the winter, we can 
do some DX as well.

Thanks again for all of your suggestions and help.
Joe