[NCARC] Can't get into 115 or 275

[John at]

One thing to keep in mind.....   my FT-7900 does not have separate RX and
TX encode/decode under "standard split" conditions.   I had to program the
radio as if it had and ODD split between RX and TX.   This work around
allowed me to program TX and RX tones separately.    I did have to program
the TX frequency too. (144.515MHz)

Yes I know this is a pain but it sure has been nice to NOT hear dragging
pipes.

John at KB0NE, amateur radio station

*"Not* *all HAM's are equal...**      Some know Morse code..."*

*From **PRO-CW-Club*


On Mon, Aug 25, 2014 at 4:09 PM, <tim at timannable.com> wrote:

> Seems like something that should be updated on the ncarc.net website, it
> still shows 100hz in and out.
>
>
>
>
>
>
> Sent from Windows Mail
>
>
>
>
>
> From: Dan W7RF
> Sent: ‎Monday‎, ‎August‎ ‎25‎, ‎2014 ‎4‎:‎05‎ ‎PM
> To: ncarc at mailman.qth.net
>
>
>
>
>
> Encode only, use PL 100.0 Hz
>
> IF you decide to use the decode function of your radio tone squelch, use
> 110.9 Hz
>
> So,
> Encode (transmit) PL 100.0 Hz
> Decode (receive) PL 110.9 (If desired or just use PL Encode only with
> carrier squelch (NO PL tone) receive.
>
> This is valid only for the NCARC 447.275 and 145.115 repeaters.
>
> 73, Dan W7RF
>
> On 8/25/2014 4:01 PM, Richard Huebner wrote:
> > Hi Paul,
> >
> > Your outgoing tone needs to be 100Hz to get in. That is all that is
> > required. Your receive tone will keep you from getting other interference
> > that breaks your squelch, but isn't necessary. Try without your receive
> > tone and you should get into the 145.115 and 447.275. I am not able to
> make
> > the receive tone work, either, but that shouldn't keep you from getting
> in.
> >
> > Anybody know what the receive tones are?
> >
> > Thanks,
> > Rick, W0RCY
> >
> >
> > On Mon, Aug 25, 2014 at 12:28 PM, Paul Davis <pauld at phdavis.com> wrote:
> >
> >> Hi Guys,
> >>
> >> I know that the tone on the 145.115 and 447.275 has changed but now I
> can’t
> >> seem to get into the either.
> >> I’ve checked and made sure that RX tone is set correctly for both 110.9.
> >> I’ve got Kenwood TS-2000 but can’t find anywhere to check the TX tone.
> I
> >> was able to access both repeaters before.
> >>
> >> Any idea what I have setup wrong?
> >>
> >> Thanks,
> >>
> >> Paul H Davis
> >> Pauld at phdavis.com
> >> Cell: 720-935-2275
> >>
> >>
> >> Thanks,
> >>
> >> Paul H Davis
> >> Pauld at phdavis.com
> >> Cell: 720-935-2275
> >>
> >>
> >>
> >> ______________________________________________________________
> >> NCARC mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/ncarc
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:NCARC at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >>
> > ______________________________________________________________
> > NCARC mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/ncarc
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:NCARC at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> NCARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ncarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:NCARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> NCARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ncarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:NCARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>