[MVMA] Update on calling between HH and MeshPhone

[Chuck Gelm]

On 10/20/21 05:47, Chuck Gelm wrote:
> A new trunking arrangement has been installed between HamShack HotLine 
> and MeshPhone.
> This arrangement lets a user on one network directly call a user on 
> the other network without going through any intermediate steps.
>
> *MeshPhone -> HH*
> 1. Dial 78, wait for dial tone then dial the HH extension as follows:
>
>  1. If the HH extension is 3-digits long, dial 590-0xxx from MeshPhone
>     where xxx is the 3-digit HH extension number.
>     For example, HH extension 456 is MeshPhone 590-0456
>  2. If the HH extension is 4-digits long, dial 590-xxxx from MeshPhone
>     where xxxx is the 4-digit HH extension number.
>     For example, HH extension 4508 is MeshPhone 590-4508
>  3. If the HH extension is 5-digits long, dial 59x-xxxx from MeshPhone
>     where x-xxxx is the 5-digit HH extension number.
>     For example, HH extension 50223 is MeshPhone 595-0223.
>
>
> HH 10-digit extension numbers are not supported from MeshPhone at this 
> time.
>
>
> *HH -> MeshPhone*
> Dial 88 plus the MeshPhone 7-digit number.
> For example, MeshPhone extension 973-2111 is HH 88-973-2111 (do not 
> wait for a second dial tone)
>
> 73, Mark, N2MH
> MeshPhone: 973-2111
> HH: 88-973-2111
> -----
> Reference:
> https://www.arednmesh.org/content/hamshack-hotline-and-meshphone#comment-18190

Recent changes in nc8q-raspbx -> Hamshack Hotline gateway dialing:

New method is
dial 7676#, wait for new dialtone, dial Hamshack Hotline extension.

See the 'Whitepages' link on a node near you.

73, Chuck

-- 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20220719/db836760/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sig1.gif
Type: image/gif
Size: 7787 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20220719/db836760/attachment.gif>