[MVMA] Update on calling between HH and MeshPhone

[Chuck Gelm]

A new trunking arrangement has been installed between HamShack HotLine 
and MeshPhone.
This arrangement lets a user on one network directly call a user on the 
other network without going through any intermediate steps.

*MeshPhone -> HH*
1. Dial 78, wait for dial tone then dial the HH extension as follows:

 1. If the HH extension is 3-digits long, dial 590-0xxx from MeshPhone
    where xxx is the 3-digit HH extension number.
    For example, HH extension 456 is MeshPhone 590-0456
 2. If the HH extension is 4-digits long, dial 590-xxxx from MeshPhone
    where xxxx is the 4-digit HH extension number.
    For example, HH extension 4508 is MeshPhone 590-4508
 3. If the HH extension is 5-digits long, dial 59x-xxxx from MeshPhone
    where x-xxxx is the 5-digit HH extension number.
    For example, HH extension 50223 is MeshPhone 595-0223.


HH 10-digit extension numbers are not supported from MeshPhone at this time.


*HH -> MeshPhone*
Dial 88 plus the MeshPhone 7-digit number.
For example, MeshPhone extension 973-2111 is HH 88-973-2111 (do not wait 
for a second dial tone)

73, Mark, N2MH
MeshPhone: 973-2111
HH: 88-973-2111
-----
Reference:
https://www.arednmesh.org/content/hamshack-hotline-and-meshphone#comment-18190
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20211020/42ed00fb/attachment-0001.html>