[MVMA] Upgrading your node's AREDN firmware to current Stable: 3.21.4.0

[Chuck Gelm]

Any active node on the local network can upgrade to current stable.
You need:
  Web browser access to the node.

Browse to your node and click the 'Setup' button.
Complete the authentication challenge.
Click 'Advanced Configuration'.
Scroll down to 'aredn. at downloads[0].firmwarepath' and replace the 
'Value' with:
/http://nc8q-mesh-server.local.mesh/mesh/Stable/firmware//
Click 'Save Setting'.
Click 'Administration'.
In the 'Firmware Update' section, click 'Refresh'.
In the 'Download Firmware' area, click 'Select Firmware'.
Click the filename stating with 'arden-3.21.4.0'.
Click 'Download'.

Your node will load the firmware and reboot.

-- 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20210414/05816cc1/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sig.gif
Type: image/gif
Size: 4699 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20210414/05816cc1/attachment-0001.gif>