[MVMA] ARDOP anyone?

[John Westerkamp]

I think the problem is that I don't understand what you are doing?  I don't
use Packet BBS's so I don't know what to do if that is what the site is. I
am not sure what your Ardop node is expecting? What application are we
supposed to use to connect to the Ardop node? I have tried everything I can
on Winlink and get no response, but that could be because we are so close.
Once we connect, what are we expecting to see or what do we need to do? I
am guessing people need a lot more information before they can help with
this test.

There is a good Ardop RMS gateway K0SI in Missouri that I can usually reach
in the mornings on 40 meters. It should be in the list at winlink.org.

Thanks!

John

On Sat, Jan 2, 2021 at 8:58 AM Chuck Gelm <nc8q-mesh at gelm.net> wrote:

> I have been dabbling, again, with ARDOP on my IC-7300.
> If you have ARDOP capability on HF, please assist in testing this new
> port on my BPQ BBS.
> I have added an ARDOP port on my BPQ BBS.
> The ARDOP port scans frequencies on various 80, 40, 20, 15, 10, and 6
> meters.
> Between 11 PM and 8 AM it is on one frequency on 80 meters.
> On other times it scans 2 or more frequencies.
> The scan pauses 9 seconds on each channel.
> To view the current frequency, view http://nc8q.ddns.net:48008.
> I think this port will respond to ARDOP500 through ARDOP2000.
>
> Chuck
>
>
> _______________________________________________
> MVMA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mvma
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MVMA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20210102/7243aa7e/attachment-0001.html>