[MVMA] Go-Kit deployment at incident

[Chuck Gelm]

gelmce at nc8q-mesh ~ $ traceroute nc8q-utik-hap
traceroute to nc8q-utik-hap (10.217.93.193), 30 hops max, 60 byte packets
  1  localnode (10.174.162.33)  0.273 ms  0.490 ms  0.590 ms
  2  mid6.N8JJ-Services (172.31.34.197)  65.364 ms  69.932 ms  70.599 ms
  3  mid1.WA8APB-Services (172.31.0.2)  145.221 ms  146.767 ms 146.940 ms
  4  dtdlink.WA8APB-NSM5-Rotor.local.mesh (10.15.245.128)  147.497 ms  
148.811 ms  151.951 ms
  5  W8XRN-XWARN-Link.local.mesh (10.206.200.108)  152.597 ms 152.737 
ms  154.182 ms
  6  dtdlink.W8XRN-XWARN-Omni.local.mesh (10.79.204.159)  154.658 ms 
156.603 ms  157.112 ms
  7  WA8APB-Hamvention-XWARN-Link.local.mesh (10.132.82.68)  163.829 ms  
144.290 ms  142.380 ms
  8  NC8Q-uTik-hAP.local.mesh (10.217.93.193)  149.162 ms  750.755 ms  
815.038 ms
gelmce at nc8q-mesh ~ $

  The AREDN booth IP Camera is one of the MVMA cameras and
is connected to my Mikrotik-hAP.

  Perhaps if my hAP was on the table instead of lying on the floor under 
the table,
we could reduce the latency. Perhaps the camera view was only intended to be
accessible from the booth. ?

  I am very very busy with my volunteering with Prize Booth committee.

  Are there any available local meshers with a skill set capable of 
improving the links between
the AREDN booth camera and the local mesh network?

Chuck


-- 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20190519/c46d1468/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sig.gif
Type: image/gif
Size: 2662 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20190519/c46d1468/attachment-0001.gif>