[MVMA] John W. W8LRJ -Beavercreek: Attempt to link with Tim's loaner nodes

[John J. Westerkamp]

I have the loaner setup and pointed at KAS, but getting no signal at all. Do I need to change an SSID somewhere since there were some recent updates at KAS? 

John Westerkamp
W8LRJ

On September 26, 2018 12:56:24 PM EDT, Chuck Gelm <nc8q-mesh at gelm.net> wrote:
>
>
>On 09/26/2018 12:08 PM, John Westerkamp wrote:
>> So near and yet so far!
>>
>> I tried connecting to MVHS and Xenia to no avail. I am worried that 
>> the trees on my southern and eastern horizons block the view. Of 
>> course, I could have been doing something wrong, too, but I was able 
>> to connect to KAS with over 40 dB SNR and saw the entire mesh grid 
>> when I moved down the street so I had clear line-of-site to KAS.
>>
>> I will see about getting Tim's loaner again and setting it up on the 
>> roof. That should be about 25-30 feet high. I would like to be a mesh
>
>> user on the network, if possible.
>>
>> Thanks!
>>
>> John
>Hi, John:
>
> I am guessing that the $49 nano loco M2 would suffice to link with
>KAS.
>
>  Welcome aboard.
>
>Chuck
>
>
>_______________________________________________
>MVMA mailing list
>Home: http://mailman.qth.net/mailman/listinfo/mvma
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:MVMA at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20180928/5051e365/attachment.html>