[MRCG] ART-13 parts?

[Scott Johnson]

I have a donor carcass, should have the parts you need.  I will check
tomorrow.

Scott V. Johnson W7SVJ
5111 E. Sharon Dr.
Scottsdale, AZ 85254-3636
H (602) 953-5779
C (480) 550-2358
scottjohnson1 at cox.net
scott.johnson at ieee.org

-----Original Message-----
From: MRCG [mailto:mrcg-bounces at mailman.qth.net] On Behalf Of Ic897d
Sent: Sunday, September 4, 2016 9:16 PM
To: mrcg at mailman.qth.net
Subject: [MRCG] ART-13 parts?

All,
I am working to restore an ART-13.  It needs the U7 power socket since the
previous owner had mounted a tube socket in its place (sigh).  It also needs
the bottom cover and the top rear cover (right behind the tubes).  If
somebody has a donor chassis out there for parts, let me know.  I'd pay
reasonable $$, I do see that there is a bottom panel on eBay for $75...but I
am not Bill Gates.

73

Craig
N6CAV
______________________________________________________________
MRCG mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrcg
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:MRCG at mailman.qth.net

Website: http://www.mrcgwest.org

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html