[MRCG] SCR-522 xtals

[boatanchor at martasystems.com]

Hi Chuck -

When you get a chance, could you measure the B+ on your RA-62 with no load ? 
After getting mine working (recapped, replaced bad bleeder, etc) my no-load 
voltage is +465 volts with the power switch in the 125 position. The bias is 
spot on at -150, and the filaments seem ok at +14. For comparison, my 
dynamotor no-load B+ is 300 v, about what it's supposed to be...   hmmm.

Thanks
John WB6AZP


-----Original Message----- 
From: Chuck McClurg
Sent: Sunday, January 19, 2014 17:17
To: West Coast Military Radio Collectors Group
Subject: Re: [MRCG] SCR-522 xtals

Well after looking for a Receive crystal with no luck I am open to the best
method to "grind" one of the ones I have up to the correct frequency.

What is the best way to go with trying this?  I have trolled the internet
and found a couple of ideas but wanted to ask if anyone has tried any of
them with any
sucess.

Any ideas welcome.............................

Chuck
N7UVZ



----- Original Message ----- 
From: "Chuck McClurg" <j-mcclurg at sbcglobal.net>
To: "West Coast Military Radio Collectors Group" <mrcg at mailman.qth.net>
Sent: Friday, January 17, 2014 2:55 PM
Subject: Re: [MRCG] SCR-522 xtals


> Group:
>
> Well after going through 267 crystals and calculating every which way 
> (Thank God for Excell!) I find I have ONE transmit crystal for 144.45 Mcs 
> but no receriver crystal.....:-(
>

______________________________________________________________
MRCG mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrcg
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:MRCG at mailman.qth.net

Website: http://www.mrcgwest.org

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3681/7015 - Release Date: 01/19/14