[MRCG] MITE TTY Motor

[Chuck McClurg]

Hi Ed:

Yes I am.  I have three PU-532/PPS-4 set I picked up from a friend.  They 
were used to charge the battery for the radar but have a 400w output at 
400Hz for a second output source.  I also have the small genset for the 
AN/TRC-27B Tactial microwave to use also if needed.

Hopefully I will find one motor and be able to run both from one set.  I 
will have to check the current load for total draw!

Chuck




----- Original Message ----- 
From: "Ed Zeranski" <edzeranski at cox.net>
To: "West Coast Military Radio Collectors Group" <mrcg at mailman.qth.net>
Sent: Friday, August 22, 2014 6:12 AM
Subject: Re: [MRCG] MITE TTY Motor


> Will the units I have. Are you going to use the 400Hz genny for the 
> PRC-47??
>
>
>
> EdZ
>
> Subject: [MRCG] MITE TTY Motor
>
> Group:
>
> I am trying to get a system up and running for the RTTY Net and wondered 
> if
> any one has a 400Hz motor for a MITE?
> Thanks,
>
> Chuck
> N7UVZ
>
> ______________________________________________________________
> MRCG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrcg
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCG at mailman.qth.net
>
> Website: http://www.mrcgwest.org
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> MRCG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrcg
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCG at mailman.qth.net
>
> Website: http://www.mrcgwest.org
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html