[MRCG] Can't run Clatternet tonight

[Tim]

Mark - I was just sitting on the freq doing something else when Eric AG6EB
shows up.  That 850 shift jumps right out you!  He was running 850 shift on
a glass terminal but solid sigs both ways.  As copied here:
NXD6CC DE AG6EB HEY THANKS, WAS JUST GETTING SET UP TO SEE IF I COULD
COPY THE CLATTERNET TONIGHT AND HERE YOU ARE. 100 COPY, USING A COMPUT
ER RIGHT NOW BUT SHOULD HAVE MODEL 28 TTY ONLINE LATER, OR MAYBE THE
15.  DE AG6EB AG6EB K

ZTB78-&6EB AG6EB DE N6CC N6CC
OK SOLID COPY - YOU SURPRISED ME HI HI...I AM RUNNING A
PRC-47 AT 20 WATTS FROM SAN RAMON CA TO A DIPOLE,,,
I AM RECEIVING YOU ON AN R-390 AND USING FLDIGI FOR RECEIVE
BUT I AM NOT BREADK..BREAKING YOU ON THE CV2455 CONVERTER
FOR SOME REASON.  STILL SORTING OUT MY MARKS AND SPACES HI HI
BTU,,,AG6EB DE N6CC KKKEUBQKXO

KON6CC DE AG6EB AH OK SAME HERE. I AM USING FLDIGI AT THE MOMENT
BUT I AM TRYING TO AT LEAST COPY USING A HOMEBREW DEMODULATOR
IF I CAN GET IT TO WORK RELIABLY WIHT WIDE SHIFT.. MIGHT TAKE
A BIT OF SOLDERING... ANYWAY I WILL BE AROUND FIDDLING FOR A
BIT IF YOU NEED ANY TESTING OR SIG RPTS ...
N6CC DE AG6EB AG6EB K

KKAG6EB DE N6CC OK,,SOLID COPY, YOUR SIG IS PRETTY STRONG HERER...I WILL BE
MONITORING IN TH SHACK, MAYBE OTHERS WILL
SHOW UP BUT MARK SAID HE COULD NOT MAKE IT TONITE AT 2030
DUE TO  A FAMILY CONFLICT TIMEWISE...ANYWAY, THANKS FOR
GIVING THIS A TRY!!!
73 FOR NOW,,,AG6EB DE N6CC K K KQDN6CC DE AG6EB I'M USING ABOUT 40W TO A
DIPOLE NOW, ON IC7000. YOUR
SIG LOOKS VERY CLEAN AND GETTING 100 CPY AS WELL. I ONLY JUST
HEARD ABOUT THIS NET FROM A MESSAGE TO GREENKEYS SO I'M EXCITED
TO SEE ANYTHING BUT CONTESTING ON RTTY! OK BACK IN A BIT, NEED TO
GET THE CONVERTER ADJUSTED A BIT MORE.. MAY CALL AGAIN TO CHECK
IF YOU'RE STILL AROUND. 73 DE AG6EB SK

KVGJGNAG6EB DE N6CC  OK COPY ALL.  I STILL CANNOT DECODE YOU WITH THE
CV2455 BUT IT'S PROBABLY ON MY END.  STILL
TRYING TO FIGURE THIS STUFF OUT..OK ON GREENLEYS - DON'T TELL ANYONE
THAT WE ARE USING GLASS TERMINALS - LACK OF MECHANICAL TTY
WILL PROBEBLY GET ME TARRED AND FEATHERED HI HI...ANYWAY
THANKS FOR STOPPING BY, I WILL BE QRV FOR NOW..

For MRCG guys not interested in RATT - sorry for the use of the bandwidth.
Just thought you might be interested...



On Sun, Aug 10, 2014 at 3:54 PM, Mark J. Blair <nf6x at nf6x.net> wrote:

> Guys, a family thing came up and I can't make the net tonight. I should be
> back next week. Sorry!
> ______________________________________________________________
> MRCG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrcg
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCG at mailman.qth.net
>
> Website: http://www.mrcgwest.org
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>