Scott,
Thank you for the lightning fast response! 
I have some clansman radios and these connectors are half the size..  mini...

They have a weird name to them
6 pin hirose male
But must be the correct version needed.. 
Check out the diagram. 
If I get desperate, 
I might hardwire a 4pin CB bulkhead, on the side of the radio so it doesn't look like a massacred it too much. 





Best regards
Dave
KD2GIY

On Mon, Jul 13, 2026, 1:39 PM Scott Pastor <scottpastor@gmail.com> wrote:
Dave, 
     That microphone jack reminds me of the family of audio accessories that the U.K. Clansman series used. After work today I'll compare your photo with one of my handsets and see if I have anything that I can send you to help out. 

73, 
Scott, kc8kbk 
scottpastor@gmail.com

On Mon, Jul 13, 2026 at 1:32 PM KD2GIY via MRCA <mrca@mailman.qth.net> wrote:
The Sussex county New Jersey ham fest was great! 
We had two operators from this group join in on, 51.000 MHz 1 on a prc-126 and the others on prc-68s.
Weather was great, a lot of vendors showed up. 

I managed to pick up a Datron TW7000 minus the encryption modules for a great deal. 
Now all I have to find is a microphone or at least a connector to go to this silly microphone bulkhead.
Believe it or not it was a Sure desk microphone that got supplied with the radio.  

If anyone has or can point me in the right direction for the connector or a microphone I am all ears! 


Best regards
Dave
KD2GIY
______________________________________________________________
MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:MRCA@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html