The board is a "Active" antenna from a Kit by Pacific Antenna.
During testing I compared it with my end fed half wave on 40 and
any signal that was detected using the half wave could be heard
using this board. During testing I had to drop the half wave to the
ground because of coupling between the two antennas and even then
move the half wave wire for more separation. I was surprised with
the interaction between the two antennas. The board has its built in
power supply which eliminates AC line interference and a
collapsible whip. No IC's involved just a couple of FET's. Perfect
for field ops.
On 6/30/2026 8:33 PM, B. Smith via MRCA
wrote:
Field Day is an excellent event to test equipment. This board
worked very well.
Z
______________________________________________________________
MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html