Jeff if you can’t find any connectors an alternate option is to make up a harness using the AMP crimp-able male and female bullet quick disconnect connectors sold at Home Depot.  I used the ones with the blue sleeves. I built the harnesses back in the 90s, over 30 years ago now for my ART-13, you just have to be careful to label the leads in case one or more of them  gets loose and or you need to disconnect the harnesses to work on or move the radio.  

Also if you continue having trouble with your auto tune motor, use the manual tuning position on the channel switch.  My ART-13 auto tune does work in general but I never use it because the final amplifier coarse tuning (control C) bandswitch does not respond to the auto tune drive. Since the radio rarely is used other than on 3885 kHz here, the few frequency and band changes are easily done manually. 

AJ1G
Sent from my iPhone

On Mar 18, 2025, at 04:52, JEFF CICCONE via MRCA <[email protected]> wrote:


folks anyone have spares to sell for the ART13 ad dynamotor.  I need U6 for the remote, U9 for the dynamotor also the dynamotor  connector jack  and U7 power and U8 control. In the past Robert Downs had these but haven’t head from him - anyone know if he is still around?  let me know thanks. Jeff N2IA
______________________________________________________________
MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html