Not the only one...... I even routed it through a switchboard and had a field phone remote activated

1st  Lt Walt Skavinsky, CAP
Assistant Deputy Commander for Cadets
Communications Officer
Quakertown Composite Squadron 904
U.S. Air Force Auxiliary
www.gocivilairpatrol.com
www.pawg.cap.gov
(C)  267-249-9585

Get BlueMail for Android
On Oct 3, 2024, at 15:55, Ray Fantini via MRCA <[email protected]> wrote:

 

Thinking that you may be the only one I know who has used a GRA-6 DC Remote before with a PRC-47 figure you may know. Been taking a real beating with local noise and my GRC-106, espicaley if I use the MEP-035 generator. Looking at the last video think you know what I am talking about. The big question is not about transmitting or control of the T/R process being that’s all straight forward. My question and according to your web page I think you did this is what about driving a speaker like the LS-166 using the twofer adapter (J-654/G) with the remote? Know it would work with a handset but I would like to set up a remote operating location away from the mutt, generator and all that sort of stuff and try that but want to be able to do the LS-166 speaker at that location from the GRA-6 remote and did not know if the transformers knock the receive audio down to piss week or if you drive the remote hard and then they distort?

As if this is not crazy enough also thinking of running UGC-74, MD-522 and that entire mess at the remote location too, stupidity has no bounds!

 

Ray F/KA3EKH

 



MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html