Hi Steve,
Thanks for your comments.
I'm not quite a fossil when it comes to digital tech, but damn close. I was able to program the ProgRock with Anthony's live tutorial at the MRCA Gilbert meet and the QRP Labs web page.
The harmonic issue seems to be manageable in the context of the TRC-77, as there are tuned circuits following it, and as a QRP rig any harmonics are going to be really weak.
I have experienced an undesired but not problematic spurious frequency response. I am used to hearing sideband around 7039 from VE or DX stations so I was not alarmed when I heard some monkey chatter. I noticed, though, that the station was not signing wawa wawa wah but rather wawawawa wah, so I tuned it in with the clarifier and it was not Victor Echo Three but W One calling the Mass/RI phone net. I looked up the net and I was hearing something from around 7243kc.
That's only one time I have experienced an identifiable spur, and I plan to look into whether tuning and/or injection level helps.
In the meantime I am still having a lot of fun with the set as configured.
I was getting ready to get back into crystal grinding to make matched pairs until Anthony brought forward the ProgRock option.
When I was doing crystal controlled VHF work I got into crystal etching for its precision, with some coaching, maybe from WB2JWU and/or WA2EJT or both. Maybe that would be a good approach to the PRC-74 problem.
73, Rob
I have really enjoyed all the QRP Labs kits I've built.
Just a couple weeks ago I put a 10m WSPR beacon on the air from here on
Kauai using another Ultimate 3S kit and a low-pass-filter kit. A
successful result and quite economical.
I've used ProgRock2 devices several times as a crystal substitute, and I'd like to share my experiences:
- The USB programming requires that you know how to use a terminal program to talk on a USB port.
-
The output is a harmonic-rich square wave, so filtering may be
necessary in some applications. QRP Labs has very inexpensive low pass
filter kits that may be helpful.
-
These are microcontroller/synthesizer modules and as such will spray
significant radio noise. When used in a transceiver or receiver you
should be ready for some reception interference. Shielding and
filtering the lines into the ProgRock2 can help, but remember you are
directly coupling the unit into your receiver. If a birdie from the
ProgRock2 happens to fall on a desired channel it might be a difficult
problem.
- If
you are considering using a ProgRock2 in an FM transmitter application,
you will need to make sure the rig uses phase modulation and not
direct-FM. Direct FM wants to frequency modulate the crystal
oscillator, and if you use a ProgRock you can't do that.
I
don't want to discourage people about the ProgRock2 - it is a very
handy device and have successfully used them in projects. But I have
also been frustrated and given up on that approach. It is important to
realize the reality of the situation and manage one's expectations.
--------------------------------------------------------------------
Radio is your best entertainment value.
--------------------------------------------------------------------
MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:MRCA@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html