Hello all,
As you probably know, Ken KD2GFM became a SK June 27th.
I went to his place today where they are looking to sell some equipment. I took pictures. There appears to be about 3 UGC-74B’s, 3 UGC-74As, one TTY 28 KSR and one Kleinschmidt TT-76C. The -74B shown in the center of several, is currently
connected to a GRC-106/MD-522 and has recent TTY traffic printed on it. I would bet the 74Bs work and maybe 1 of the 74As. Although the “best” looking one says it has a bad “K” key. There are lots of spares like extra keyboards and covers lying around. Ken
also has a bunch of white boxes of ribbons, both the ones on reels (74A) and the cartridges for the 74B. The TT-76C was able to be turned on but I and I was able to punch some characters but I don’t have experience with these so didn’t look much into it.
The 28 KSR the motor turns very freely and all mechanisms move freely. Needs some cleaning but I bet this could be working without much difficulty. Some surface rust on the page printer, but outside is a nice Navy gray.
TTY Pictures here:
https://w2hx.com/?prefix=TEMP/KD2GFM/TTY-Related/
Also available two GRC-106 units with MD-522 CVs and one PP-4763/A 50A power supply. I believe at least one of these was in regular use, maybe both.
https://w2hx.com/?prefix=TEMP/KD2GFM/GRC-106-Related/
Some Harris stuff. RF-350K, RF-355 amp, CU-2310/URC coupler. This was his daily driver:
https://w2hx.com/?prefix=TEMP/KD2GFM/Harris-Related/
Some miscellaneous stuff. Hammarlund HQ170, B&W 5100+Mic. The 5100 was a recent acquisition but my understanding is that it is working, R-390A, etc:
https://w2hx.com/?prefix=TEMP/KD2GFM/Misc-Ham/
All sales final, working condition not guaranteed. The stuff is located in Carmel, NY. It can also be delivered to the MRCA/Gilbert show but preference to pick up in Carmel.
Contact me for price negotiations. Please start with an offer. Either pick up in Carmel, NY or Gilbert MV show. No shipping.
73 Eugene W2HX
My Youtube Channel: https://www.youtube.com/@w2hx/videos