Jeep:

     The AB-1135/PRC mount is an angle iron mount that is driven into the ground by bootheel and has a Prc-10 type of antenna mounting block to accommodate an AT-271 fishing pole antenna. I'm thinking this mount, along with a few radials on the ground, will give you a decent match but won't be very efficient or effective on these low bands. I'm thinking a (very) long wire antenna and a counterpoise wire might be more effective. Think AT-984A/G from the PRC-25.

73 d

Gene Smar AD3F 

Sent from my Radio Shack TRS-80 model 100 laptop

On Thu, Feb 16, 2023 at 6:59 PM, Doran Platt

<jeepp@comcast.net> wrote:

I have a tactical tricked-out Yaesu FT-897D with an LDG AT-897 tuner. Even have the requisite H-250. I have used it a time or two for Moose and Squirrel with an inverted V in the back-yard. Is there a practical design for a whip that would work on the lower band 80/40/5MHz? I have some rods from a 292 antenna and a folding antenna from a PRC-8,9, or 10. Running the '897D from a 12v battery the power level is about 40 watts at best (vice a solid 100 watts with 13.5V). Maybe I'm barking up the wrong tree? A decent counterpoise is always the bugaboo. TNX

Jeep K3HVG

______________________________________________________________

MRCA mailing list

Home: http://mailman.qth.net/mailman/listinfo/mrca

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:MRCA@mailman.qth.net

This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html