Very nice. Good idea on the terminal strip. I do this regularly. And this is the best solution for getting cables with large connectors through walls. Cut the cable, move it through the wall and then reconnect both halves using a terminal strip as the interface.

73 Eugene W2HX

Subscribe to my Youtube Channel: https://www.youtube.com/c/w2hx-channel/videos

From: [email protected] <[email protected]> On Behalf Of MilComm Guy
Sent: Wednesday, November 17, 2021 7:40 AM
To: [email protected]
Subject: [MRCA] Mite TTY Cable Update

Unable to locate a service cable so like the GRC-19 cable I decided to build my own.  I used the same CX-4722 cable and purchased a connector on eBay.  I terminated the connections on a terminal strip for now to make testing easier, will construct an enclosure similar to the original later on.  For some bling I added a shrink on label.

Mark

K1HF