[MRCA] disassembling the US 4-pin power connector?

[MIKE MCAULEY]

Now you should pull the butterfly nut out.Then you can slowly and carefully manage the male pin section out.
Mike
 
 
  On Sat, Aug 17, 2024 at 10:45 AM, W2HX<w2hx at w2hx.com> wrote:    <!--#yiv8710340995 filtered {}#yiv8710340995 filtered {}#yiv8710340995 filtered {}#yiv8710340995 p.yiv8710340995MsoNormal, #yiv8710340995 li.yiv8710340995MsoNormal, #yiv8710340995 div.yiv8710340995MsoNormal {margin:0in;font-size:11.0pt;font-family:"Aptos", sans-serif;}#yiv8710340995 span.yiv8710340995EmailStyle17 {font-family:"Aptos", sans-serif;color:windowtext;}#yiv8710340995 .yiv8710340995MsoChpDefault {font-size:11.0pt;}#yiv8710340995 filtered {}#yiv8710340995 div.yiv8710340995WordSection1 {}-->
I know it is something like “MW10M(M)Axx” here is a picture. I’ve removed both spanner rings and the cable nut so far. But what is the next step to access the wires? I’d prefer not to mangle this if I can avoid it hihi.
 
  
 
Thanks
 
  
 
73 Eugene W2HX
My Youtube Channel: https://www.youtube.com/@w2hx/videos
 

 
  
 ______________________________________________________________
MRCA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:MRCA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20240817/690261e1/attachment.html>