[MRCA] ATC ART-13

[Herb Mooney]

Would this A/C power supply work well enough for testing initial setup
prior to using my batteries with the dynamotor?
https://www.amazon.com/gp/product/B00PWSDH8C/ref=ox_sc_act_title_2?smid=AMH4W1K8OCGMX&psc=1

Herb - W4BCH

<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Wed, May 17, 2023 at 10:52 AM Jeep Platt <jeepcomms at outlook.com> wrote:

> I just sold an on the air ART-13 and ARR-15 receivers for $1k. The ART-13
> was complete and virtually new condition.  The ATC (Navy designation) and
> the ART-13, both T-47s, are virtually the same. I would shoot for the
> easiest one to get on the air.  I might also recommend an a.c. power
> supply, to begin with. That will allow sequential application of voltages;
> filaments first, the 400v, then the 1100v HV.
> Things to sequentially check:
> All tubes light up.
> Autotune works and properly "homes". ( no home, no TX key).
> Apply 400v and check grid drive.
> Finally, apply HV and check for power out.
> If you need initial dial settings for test on 75 meters (can provide).
> You will need between 700 and 1100pf of loading to tune 75 meters at 50
> ohms.
> Been there, done that, at least 8 times....  It can be done.
> Jeep K3HVG
>
> Sent from my Verizon, Samsung Galaxy smartphone
> Get Outlook for Android <https://aka.ms/AAb9ysg>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20230530/a8aed8f8/attachment.html>