[MRCA] R-45/ARR-7 Power Supply?

[Al Klase]

Eugene,

Looks great.  Shouldn't that be 270 Volts at 135 mA?

Al

On 5/27/2023 5:55 PM, W2HX wrote:
>
> Hello friends.
>
> I just acquired a nice ARR-7 that was electrically restored and 
> aligned by a very competent fellow (pic attached). He made a 60 Hz 
> AC-DC power supply for it, but it was crazy expensive. So here goes. 
> The specs I need are:
>
> 2,700 VDC @ 135 mA
>
> 25 VDC @ 350 mA (for scanning motor, which is half the fun!)
>
> 6.3 VDC @ 4.0 A
>
> Does anyone know if there is some existing power supply from some 
> other piece of equipment that might have similar specs that I could 
> begin hunting for? I know there is the PP-32/AR but my understanding 
> is that this is a 400 Hz unit (380 Hz to 1,000 Hz).
>
> If there isn’t another commonly available PS that would supply these, 
> I may have to resort to building one. On ebay there are transformers 
> with multiple secondaries but searching for such a beast is very 
> difficult. Any advice on searching for a multiple secondary 
> transformer? And of course, should all else fail, I could make a PS 
> with 3 transformers if necessary.
>
> Any suggestions welcome.
>
> 73 Eugene W2HX
> Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos 
> <https://www.youtube.com/@w2hx/videos>
>
>
> ______________________________________________________________
> MRCA mailing list
> Home:http://mailman.qth.net/mailman/listinfo/mrca
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:MRCA at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html

-- 
ARK Sig Block Al Klase - N3FRQ
Jersey City, NJ
http://www.skywaves.ar88.net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20230527/1a3f820a/attachment.html>