[MRCA] UG-565 adapters

[B. Smith]

Doesnt adding the C to N adapter change the length of the phase line?


On 7/17/2023 3:16 PM, Ray Fantini wrote:
>
> Why do UG-565 Type C to Type N adapters cost so much! The final output 
> combiner on my Harris RF-1110B uses them on its input and the output 
> of the rack frame are all type N plugs. Been using just one half of 
> the amplifier, two panels and that comes out as a signal N connector 
> on the back of the amplifier frame. But now that I am getting the 
> other half of the amplifier up and running will need to connect the 
> original external RF combiner network external of the amplifier and 
> that has type C connectors. Don’t know what I did with the original 
> cables but will have to have matching cables from each set of 
> amplifiers and matching adapters to keep everything in phase. Have a 
> couple adapters now for the output and rejection load.
>
> Looked on eBay and it looks like they beat you down for at least 
> twenty or thirty bucks per adapter! Plus shipping. Maybe I can con 
> someone around here for less?
>
> Wonder who’s idea it was to use C connectors anyway?
>
> Ray F/KA3EKH
>
>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html