[MRCA] 9AM RATT NET AAR

[Nick England]

Great to have Eugene on the air via RATT. It always takes a few sessions to
knock down the operational gremlins.
We had 7 check-ins this morning plus several people reading the mail.

I just checked in to the west coast RATT net (7087kc, 0930 Pacific). I was
copying them via an SDR in CA and Daniel K6YIC was copying me via an SDR in
GA. Daniel was punching a tape of my transmission and then reading the tape
to re-transmit me locally. 1950's torn-tape relay via internet radio -
pretty cool mixture.
I'll get set up to do the reverse relay so that west coast guys can check
into the east coast net.

Cheers,
Nick K4NYW

Nick England K4NYW
www.navy-radio.com


On Sat, Nov 12, 2022 at 11:29 AM W2HX <w2hx at w2hx.com> wrote:

> ZCZCZC
>
>
>
> Well, I got a semblance of a RATT station set up for this morning’s MRCA
> RATT NET. It was my first RTTY attempt since probably before 2012. First,
> apologies to the net for doubling over someone else. My copy from K4NYW was
> probably 80% and once I saw my call I thought it was my turn. I later saw
> Nick turned it over to someone else first and me next. Second, apologies
> for not sending LFs. This is a new set up for me (glass terminal) and I
> need to figure out how to send LFs using the software (VanDyke SecureCRT).
>
>
>
> I did identify a real problem in my setup. I use a device from Black Box
> that converts ASCII to ITA2 bidirectionally (ascii terminal program in
> use). And for some reason this device kept locking up, requiring a hard
> reset. At first I thought it was when I transmitted, but then I saw that on
> receive it would frequently lock up and I would no longer receive the text
> (I could hear the remote station fine on my speaker). This might be tricky
> to figure out…
>
>
>
> And finally, I think I have some RF in the shack. My first transmission
> was at a full KW and when I began transmitting, my cordless phone when
> crazy (went into paging mode.. I never knew it had a paging mode!). When I
> reduced power to 250W that stopped happening.
>
>
>
> Station was a Harris RF-1140A consisting of OCF dipole (seven bands), a
> RF-590 receiver, RF-1310A exciter, RF-1110C KW amp, RF-3466A modem.
>
>
>
> Sigs we quite good! Armchair copy for W1AEA, KA3EKH, K4NYW (80%), KD2GFM
> (70%) and several others who, in my excitement, I neglected to write down!
>
>
>
> Thanks to everyone who participates, and thanks to Nick for spearheading
> the whole thing. I will work on improving the station and my operating
> practices.
>
>
>
> 73 Eugene W2HX
>
> Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx
>
>
>
> NNNN
>
>
>
>
>
>
>
>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20221112/bd7127be/attachment-0001.html>