[MRCA] RATT net

[W2HX]

Paul what you described should have worked. Were you able to hear us but the FLDIGI wasn’t copying (possible config issue)? Or were you not able to hear us (radio and propagation issue)? I might suggest trying 1.5 stop bits if the 2 stop bits don’t work, but if you couldn’t hear us then the config might not have been the issue. From my QTH everyone was 100% copy except Steve somewhere down south iirc.


73 Eugene W2HX
Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos

From: mrca-bounces at mailman.qth.net <mrca-bounces at mailman.qth.net> On Behalf Of Paul Sokoloff
Sent: Saturday, December 10, 2022 9:43 AM
To: mrca <mrca at mailman.qth.net>
Subject: [MRCA] RATT net

Trying to copy today.  Last week used fldigi custom 850 shift LSB 45.45 baud and 5n2 parity.  Worked great.  This week no copy.  Any difference in these settings this week?

Thanks,  Paul WA3GFZ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20221210/d2bc4843/attachment.html>