[MRCA] Torn E. b.

[Ray Fantini]

Another Torn E.b. receiver that I am working on. This one was converted and had some of the internal changed along with a different plug installed on the front and am in the process of returning everything to as close to original as possible. This radio has a lot nicer face then the last one that I did, although its missing the data plate. Figure being it has the meter and the internal shield plate it must be a 42/43 production run being most produced in late 43/44 did not have the meter along with the last production models having cast stenciling and not the plates.
Just started building the AC power supply and will be doing a video of the radio when it's all finished. Too bad these things sell for so much because I would like to have one for myself, but at least this way get to play around with them while they are here in the shop.

Ray F/KA3EKH


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20220404/3984d5ff/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: front.jpg
Type: image/jpeg
Size: 563020 bytes
Desc: front.jpg
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20220404/3984d5ff/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: top.jpg
Type: image/jpeg
Size: 590482 bytes
Desc: top.jpg
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20220404/3984d5ff/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: power.jpg
Type: image/jpeg
Size: 528380 bytes
Desc: power.jpg
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20220404/3984d5ff/attachment-0005.jpg>