[MRCA] Regency Radio Pallet

[Mkdorney]

My next project is a German Torn Fu.d2 transceiver - not a repro, a real one. The transceiver itself has been modified. Coax cable connector for the antenna ( original was a banana plug ) a push button for something where the plug for the telephone remote was, and some vent holes drilled in the transmitter case. I have a 2nd transmitter case that, with a little work, can become the battery case.  The calibration device that is mounted in the battery box used a “magic eye” tube to set calibration.  Also got a line on somebody who makes really good reproduction parts. The goal is a correct, fully functioning  transceiver. 

     The original cabinet for this radio is very interesting. It’s made from a laminate.  Wood sandwiched between two thin layers of aluminum. The radio I have was made in 1944. I’ve managed to get a clear copy of the operators manual ( in German, of course ) and I’m already gathering accessories ( like antenna base, microphone, headphones, power plug and Morse code key ). I also was able to get an original transmitter front cover that, while it’s not restorable, I can pull parts off the lid and have a new lid made.   This radio operates on the lower end of 80 meters.

Mark D.
WW2RDO

“Courage isn’t having the strength to go on. Courage is going on when you don’t have the strength.”  -  Theodore Roosevelt

Sent from my iPhone

> On May 28, 2020, at 4:26 PM, Ray Fantini <RAFANTINI at salisbury.edu> wrote:
> 
> 
> Ok, so am seriously planning on starting on a new long term project. This would be restoring and setting up a AN/GRC-215 Regency Network radio pallet. This would include a GRC-215 transceiver, power amplifier, reference assembly and digital control unit. No, I don’t have and will not be looking for the TSEC KG-84 or the KY-65A security equipment but fortunately they include a bypass box on the pallet that allows you to use it without the security equipment installed.
> The problem I see right now is according to the manual the digital I/O control system, they call it the D/K assembly looks at the reference oscillator assembly (RFO) and wants to load TOD (Time of Day) data when the system starts and without a valid TOD entry the system is in fault.
> Been thru the book a couple times now and it looks like you had to use a key loader like a KYK-13 or maybe a MX-18290 to load the TOD data. They also have a GPS port on the reference assembly but cannot imagine that it would be as easy as just providing NEMA data at that port. Anyone got any ideas?
> So far this is a hypothetical project, got a line on the pallet with most of the hardware and now may be in a place where I can get the radio itself so I am trying to see how much more would be involved with this.
> Also posted this to the GRC-215 group, who would have thought! Have to wonder if they have a GRC-106 user’s group?
>  
>  Ray F/KA3EKH
> 
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20200528/f823aa29/attachment-0002.html>